Blending with Clippers
Status of the Industry, 2014

Box Fan Use and Maintenance

I have a confession to make. I sometimes use box fans and floor dryers to dry dogs with in my shop.

Anyone who has read my blog or my posts on any groomers forum knows I am FOR hand drying dogs and AGAINST heated cage dryers. You should also know that I realize not every dog can be dried 100% by hand and sometimes a cage dryer is needed. That is where my box fans come into play.

I know people think that it is cruel to blow cool air on wet dogs, that it is inefficient and that those of us who choose to use these fans do so because they are cheap. None of that is true!

First of all, I use them because they allow for a nice airflow of room temperature air that provides lift for the hair and safe temperatures for the dogs. The air is quiet, and soft enough in force not to scare dogs that do not like air moving. The box fans are also very safe and even if left to run on a dog all day long they pose absolutely no danger of overheating the pets. Box fans DO NOT add heat into the air. They do not heat up dogs or the room they are used in. As long as the room temperature is comfortable, the air moving over the dogs will be comfortable as well. 

I begin the drying process by wringing out what water I can while the pet is in the tub. Then I towel dry really well. I transfer the dog to my grooming table and I use two towels usually and maybe three or four if needed to remove as much water as I possibly can. Then I use the force dryer for as much as the pet will tolerate.

Most of my client dogs do really well with the dryers. They do not fight. They do not argue. They let me dry them completely with the force dryer.  For those that do not allow even the variable speed dryer to be used to dry them completely, or those that have way more hair than I can dry efficiently and quickly, I use box fans. 

These dogs are force dried as much, or as little, as they will tolerate. I then brush the dogs hair into the way I want it to lay when dry. Ears, faces, bodies, legs and tails. I brush the entire dog out before using the dryer UNLESS its still really wet. If it is really wet (as in not force dried) I will place it under a fan for a while, then pull the dog out, brush it out, then place it back into the cage to dry the rest of the way. The brushout makes the hair lay better after drying, and that can make the difference between a nice groom finish and a bad groom finish. 

How the dryers are placed for drying also helps in the quality of finish. I have 6 fans being used in my shop currently. Two are on top of cages, two are hanging on the end of the 6 pack of cages, and the other two we use where needed. They are "floaters". I can move them to whatever cage needs it and in whatever room.

I use grooming loops that are, for whatever reason, not usable as grooming loops anymore, to hang the box fans on wire cages. Maybe they are frayed, maybe they are missing a lock, or I bought the wrong style for my preference. They work great for hanging the fans on cages.

I wrap the loop around the handles and then attach them from the wire cages on the top, blowing down, or the fronts blowing on the dog, depending on what type of coat we have.A full coated shihtzu for example I would put the fan on top blowing DOWN. For Schnauzers as well that need their faces finished up. A fan in the front will blow the eyebrows and beards backwards. Putting the fan on top will dry them, and not affect the direction they lay in when dried. 

A shorter coated dog I would hang the fan on the front to lift the coat and add fluff. I also use a General Cage 6 pack wire cage bank. It has wire grates and I took out the pans in the middle row. I use a Sahara Dryer from underneath pointing UP to dry heavy coated dogs (cockers) that need extra drying time or dogs that cannot stand up well for drying. It works great because it lifts the coat and dries them from below. It also gives me sides and fronts to place box fans to assist with drying.

Fans are also very helpful when blow drying (HVing) a double coated dog. They push cooler room air towards the dogs assisting with drying as well as reducing the chance of overheating. They can also assist with blowing the flying hair away from the person drying. Win Win!

The fans however do have problems. They get dirty. They get collect hair. I try to vaccumm them daily, wipe them off weekly and clean them monthly but once in a while I don't get to it, and then, well as you can see in the photos below, it gets dirty. The holidays resulted in needing these fans more and as a result they got dirtier than usual. 

100_1019

 Dust and grime on the outside...

I use Lysol Hydrogen Peroxide wipes to clean the outside of the fans and the blades inside as well.

100_1020    

100_1021  

 

Hair builds up on the grills and the motor itself as well.

It takes 12 screws on most fans to remove both front and back grills. I take them off, pop them in the tub and using my shampoo that is left over from the days grooming I spray down the grills and rinse well.

I then take a HV dryer and blow them off, then blow off the motor as well. That removes all the packed hair.

100_1023

See the hair clogging the motor?  

100_1024

 

Hair gone now after being blown out with the HV Dryer.

Wipe off the inside of the case and it's clean. 5 minutes maybe. Start to finish.

You can also use a heavy duty screen mesh, available at any home improvement store, and put it INSIDE the back grill. Cut it about 2 inches larger than the fan, screw the back on and trim the screen to the fan. It will make it much easier to remove the hair and vaccumm it daily to prevent it from building up in the motor.

There are two video clips below detailing how to do this. I wish I had done the screen on the fans I bought last year, but I forgot and then got busy, so they never got done. If I had, however, you would not have this blog post!

 

 

 

Some people who have read this blog post have suggested Furnace Filters on the back of the fans. Simply buy the size you need to fit your fan and tape or zip tie them to the fan back. Someone else said they used J brackets used in vinyl siding to hold the furnace filters in place. Simply cut them to size and screw them to the frame. Slide the filter in. Easy and quick.

So now you have all the in formation you need should you choose to use box fans to aid in drying. Hope you are able to save some money and save a dog's life!

Comments

MaryAnn

I love your blog; you've given me some great tips on many subjects that I use for my grooming. Thanks! I do have a question though; you stated 'I use a Sahara Dryer from underneath pointing UP'...is there a picture of this you can share as I can't figure out how the dryer goes under the cages. I would love to see a picture of the whole setup if you'd be so kind, thanks!

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Your Information

(Name and email address are required. Email address will not be displayed with the comment.)